Data & check for building trust
home Product guide Technological material Proofreading Company introduction Inquiry
Home > Products guide > Push-pull tester > MPS series Japanese site
Products guide
push-pull tester
AP series
MP series
MPS series
MPL series
MPC series
digital force gauge
load stand
digital torque checker
measuring jigs
PC torque analyzer
software to take date & etc.
MPS series

The division of the scale is detailed.
(minimum scale value is 1/2 of standard type)
High accurate measuring instrument

MP画像 Feature
It enables you to do push-pull load measurementin your hand.
Reset button is put near the tip of the finger for more efficient work,so it is helpful for repeated work.
Seven kinds of attachments are standard attached.
Please use it for various measurements.
- Guaranteed term One year
- Example of using measurement
Operation power measurement of switch
Soldering strength measurement
Opening and shutting power measurement of door
Destruction measurement of plastic component
Load setting in clamping lever mechanism etc.

★Combination agreement load stand
K-501・505M-501・505KS-501KM-501

Manual of MPS series

Main body externals dimensional drawing
Accessory (attachment) externals dimensional drawing
Special steering wheel externals dimensional drawing
standard accessory
Model Greates
measured value
Minimum
scale value
Accuracy Stroke Weight
MPS-3N 3N 0.01N ±0.2% of full-scale 10mm About 750g
MPS-5N 5N 0.02N
MPS-10N 10N 0.05N
MPS-20N 20N 0.1N
MPS-30N 30N 0.1N
MPS-50N 50N 0.2N
MPS-100N 100N 0.5N
MPS-200N 200N 1N
MPS-300N 300N 1N
MPS-500N 500N 2N
It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.
All contents Copyright:ATTONIC
All Rights Reserved
株式会社アトニック 600-5, Higashitakada-cho, Toyohashi, Aichi, Japan
TEL+81-532-41-5357 FAX+81-532-41-4826
下部バー